PRINTABLE ACCESSORIES
The body of the Flex Wheel has been designed with multiple fixture holes which enables all manner of different accessories to be directly attached, allowing the Flex Wheel to be compatible with your current printers specifications.
And for those inevitable future modifications- A diagram with location and specifications of fixture holes can be found here. (Contact Us and we will be happy to email a diagram)
PTFE coupling holder:
Allows for the attachment of a Teflon tubing coupler to the point where the filament exits the body of the extruder.
1/8 inch or 6 mm coupling mods.
(Contact Us and we will be happy to email an stl. file)
Flex Wheel Stand:
Allows your Flex Wheel Extruder to be free standing allowing for greater flexibility.
(Contact Us and we will be happy to email an stl. file)
Direct Drive hot end plate.
Adapt your Flex Wheel to a Direct Drive model.
(Contact Us and we will be happy to email an stl. file)
Stepper motor adapter.
While we have paired the Flex Wheel with an awesome 30:1 high end stepper there is always room for modification.
An add on to the base plate which allows for the use of different geared stepper motors with alternate fixture arrangements.
(Contact Us and we will be happy to email an stl. file)